- Turn on the master exploder
    * go to the CSS-PANDA low voltage control
    * turn on channel 4 with 12 V
    * the current should be about 0.5 A
  - Turn on the FEBEX, slave exploder and ''lipc-1''
    * go the the socket web interface http://192.168.10.8
    * turn on the FEBEX fans under ''Feb fans''
    * turn on ''FEBEX'' 
    * wait some seconds
    * turn on ''LIPC-1''
  - Wait about 90 seconds for the pc to boot before you proceed with [[daq:howto|setting up the DAQ]]