EMP BWEC

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

==== Iseg HV Crate and Modules ====

== Web interface control ==

  * Link: ''http://hadanapc2:8081/dcs/iseg-hv''
  * To select the channels corresponding to a specific submodule, click on the detector map.

== Normal settings ==
  * All channels in modules 5 to 9 should be on and set to 500 V. 
  * When the HV boards are set to 0, typical currents are around 850 nA.
  * During operation (HV on and beam on), currents around 2 µA.

== Possible Issues ==
  * Channel trip due to high current
  * Interlock signal off due to failure in LV power supply

In both cases the whole crate needs to be restarted to resume operation:

 1. Switch the crate off and on by clicking on the "Main Switch" on the picture.

 2. Go to the bottom right terminal window on workspace ''APFEL-HV''

   agmaas@hadanapc2:~/repo/prima-web-interface/src/iseg_hv$

 3. Run the static settings script

   python3 iseg_static_settings.py