EMP BWEC

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== VME PC ======
IP: 192.168.10.11

==== HV ====
module location: 0xAAAA0000

CAEN High Voltage (VME Crate) (negative high voltage):
start "server" on vme-pc:
  -      ssh to vme crate: $ ssh vmepc
  -      agmaas@vmic1:~$ cd HV_CAEN/HV/WebHV/
  -      start the programm on VME crate: agmaas@vmic1:~/GEM_Proto/HV/WebHV$ ./SYMBhv -c HVconfig_basel.conf
start the gui on hadanapc5:
  - $ ssh hadanapc5
  - agmaas@hadanapc5:~$ cd ~/personal_dirs/sahra/beamtime24/vme/HV
  - $ source setEnv.sh
  - $ cd build-HVgui/
  - $ ./HVgui

You can save the channel configuration and labels. HV is not turned off, if the gui is closed.


=== CFD ===
Module location: 0x00a00000

Set the thresholds:
  - ssh to vme crate: $ ssh vmepc
  - agmaas@vmic1:~$ cd CFD
  - write the desired thresholds in the config: config.txt
  - set the thresholds: agmaas@vmic1:~/CFD$ ./cfd_control

Threshold scan together with scaler:
Scaler V775, Module location: 0x00CC0000
  - start the scaler before doing the threshold scan:$ /home/agmaas/Scaler_1000mus/src/scaler 32 <dwell time [s]>"
  - to start the threshold scan: agmaas@vmic1:~/CFD/threshold_scan$ ./threshold_scan <threshold interval [mV]> <points per threshold [int]> <dwell time [s]>