Differences

This shows you the differences between two versions of the page.

--- slowcontrol:temp [2018/05/24 11:57] – himuser
+++ slowcontrol:temp [2022/01/14 18:44] (current) – external edit 127.0.0.1
@@ Line 14: / Line 14: @@
   agmaas@hadanapc2:/home/agmaas/Temp_gui/python Measurement.py x
-where x is a optional amount of time in seconds. Once this is executed, the Keyseight module will measure the temperature every x seconds (If x is omitted, the default time between two measurements is 600 s). The measurements are stored in "data.txt".
+where x is a optional amount of time in seconds. Once this is executed, the Keyseight module will measure the temperature every x seconds (If x is omitted, the default time between two measurements is 600 s). The measurements are stored in "data.txt". This process should be running in a shell all the time to provide data more or less continuously. There is a print out when the temperature is measured.
 ==== Webpage for Observing ====
-To start the webserver for observing type
+To start the webserver for observing, type
    agmaas@hadanapc2:/home/agmaas/Temp_gui/python TempServer.py port
@@ Line 34: / Line 34: @@
 Changes in the blue box settings in one client are updated in every other client. This is made using the "props.txt" file which stores all the blue box settings.
-The temperature measurements are made with the Keysight 34972A. In this GUI only six sensors are integrated. Of course there is the possibilty to change this.
+The temperature measurements are made with the Keysight 34972A. In this GUI only six sensors are integrated because it is made for Proto16 having four sensors in between the crystals and two outer ones.
 NOTE: For better displaying the year is omitted. The code for plotting also contains the year but can only show data taken within one year which is the actual year. If this should be changed one needs to modify "plotting.py".