Differences

This shows you the differences between two versions of the page.

--- slowcontrol:apfel_control [2018/05/18 09:00] – himuser
+++ slowcontrol:apfel_control [2022/01/14 18:44] (current) – external edit 127.0.0.1
@@ Line 1: / Line 1: @@
 **Starting APFEL server on hadanapc2**
-  * Start apfel server
+  * Start the apfel server
@@ Line 8: / Line 8: @@
   using port 7001
-  * Start http server
+  * Start the http server
   agmaas@hadanapc2:~$ cd Apfel_dev/Apfel_server/web_interface
-  agmaas@hadanapc2:~/Apfel_dev/Apfel_server/web_interface$ python apfel_httpserver.py
+  agmaas@hadanapc2:~/Apfel_dev/Apfel_server/web_interface$ python apfel_httpserver.py <host> <port>
   starting apfel client on localhost port 7001 ...
   connecting test pulse manager to apfel interface...
@@ Line 18: / Line 18: @@
-NB: On a raspberrypi the server should be started at power up.
+NB: On a raspberrypi the servers should be started at power up on port ''8080''.
 **Web interface**
+Connect from a web browser to ''<host>:<port>'' where ''<host>'' and ''<port>'' is where the http server is running.
 **APFEL baseline adjustment**
+  * start daq with mbs
+  * start the ''online_analysis.py'' on ''daqix''
+  * click on ''Connect''
+  * turn off all trigger sources to mbs (light pulser? APFEL test pulses? other? look at the rate)
+  * execute ''set stream_serv 1'' on mbs
+  * click ''autocalib all'' on the APFEL control gui
+  * click on ''Adjust baselines'' on the P16 online analysis gui
+  * watch the baselines and make the last adjustments by hands if needed
+  * to save the DAC values,
+    * click on ''read all'' on the APFEL control gui
+    * click on ''Create DAC file''