Differences

This shows you the differences between two versions of the page.

--- hitdetection:starting_the_chip [2020/03/02 16:13] – himuser
+++ hitdetection:starting_the_chip [2022/01/14 19:44] (current) – external edit 127.0.0.1
@@ Line 23: / Line 23: @@
    agmaas@hadanapc4:~ /KCU105/lvds_clk$ vivado18
-This will start the GUI to operate the FPGA.
+This will start the GUI to operate the FPGA. Select directly or first navigate to the lvds_clk project and open it.
-Now in the bottom left open the hardware manager and open "target" in the top middle <del>(and press auto connect)</del>
+Now in the bottom left open the hardware manager and open "target" in the top middle and press auto connect.
 If the xcku040_0 shows "not connected", right click on it and choose program device and confirm with program.
@@ Line 33: / Line 33: @@
    RIO4-1 mbsdaq > InitHitDet -a=8 --direct --init --peer=0f --rate=4 --scramble=1
-In the terminal in the bottom left execute the last command. This will start the GUI for the measurements.
+In the terminal in the bottom left execute the last command. This will start the GUI for the measurements:
+   mbsdaq@depc002:~/dabc/trunk$ export HTPORT=8119;
+   mbsdaq@depc002:~/dabc/trunk$ export REMNODE=rio4-1;
+   mbsdaq@depc002:~/dabc/trunk$ ${DABCSYS}/bin/dabc_exe ${DABCSYS}/plugins/mbs/app/web-mbs-gui-remote.xml
 The link will be found here:
 http://10.106.11.18:8119/MBS/rio4-1/ControlGUI/