Differences

This shows you the differences between two versions of the page.

--- beamtimes:2022_apr:slow_control [2022/04/19 10:25] – himuser
+++ beamtimes:2022_apr:slow_control [2022/04/21 12:02] (current) – himuser
@@ Line 12: / Line 12: @@
 === Temperature Readout ===
-  * go to hadanapc4
+  * ssh to hadanapc5
-  * go to /home/DCS/Temperature/
+  * go to /DCS/Temperature/
-  * make sure, vxi11 is an executable. if not do so with ''$ sudo chmod +x vxi11''
+  * make sure, vxi11 is an executable. Check with ''$ ls'', name of vxi11 should be green. If not, run ''$ sudo chmod +x vxi11''
-  * run BEAMTIME22_temperature_standalone.py which requires >python2.7 and numpy
+  * run ''$ python3 main.py''
   * in the script, you can adjust the ''TIMEOUT = 120'', which is the waiting time between measurement cycles and ''IP = "192.168.10.14"'', which is the ip address of the Keysight module
-  * in the case of hadanapc4: ''$ python3 BEAMTIME22_temperature_standalone.py''
   * the last measurement is always print out in the console.
   * the data for the different protos are saved in seperate files in a directory named after a unix timestamp
   * the time stamp is the standard unix one
+  * you can also read the temperature of the sensors without logging with ''$ python3 single_readout.py''